Improving the production efficiency of metal crushers is a good cost saving for users. The following are the methods to effectively improve the production efficiency of metal crushers. The metal crusher needs to be preheated and idling before starting up. Many users have ignored this detail, but it has been proved that the idling preheating before the metal crusher works can greatly improve the working state and service life of the equipment. Be sure to do a good job of lubricating the metal crusher, which can not only improve the output and production capacity, but also prolong the service life of the equipment. After the metal crusher completes the work, do not rush to shut down the equipment first, the equipment should be shut down after the materials in the crushing cavity are completely removed, which is conducive to the normal operation of the metal crusher next time, and also prolongs the service life. Improving the working efficiency of metal crushers not only saves our energy, improves our production efficiency, but also effectively protects our equipment and prolongs its service life.

There are many preparations that the metal crusher needs to do before starting up. Only when the preparations are done, the metal crusher can run better. So what are the preparations that the metal crusher needs to do before running? Before the operation of the metal crusher, it is necessary to strictly check whether the parts of each part are loose. Once looseness is found, it should be tightened in time to avoid accidents. Check the tightness of the belt, whether the belt touches the shell or slips during operation, whether it is running forward, etc. At the same time, flammable and explosive materials cannot be thrown during the feeding process. In addition to checking the tightness of various parts, check those vulnerable parts, such as bearings, hammers, and blades. Check the wear condition in time, and replace the seriously worn parts in time, so as not to affect the normal production of the equipment. To lubricate the bearing in time, only enough lubrication can reduce the degree of wear of the bearing and enable the bearing to exert strong power.