In the working principle of a rubber shredder machine, the waste rubber shredder machine uses a single axis, double axis, or four axis crushing mechanism as the equipment, combined with a fixed blade to form a crushing angle. After the reducer changes speed, the material is pressed into the shaft angle through the changes in the angle between the shafts and the clamping pressure of the shredder blade. Under the continuous reduction of the shaft angle, radial pressure is generated, Under the pressure of radial pressure and the tearing action of the blade, the material is torn from large blocks to small particles. Through the screening effect of the bottom screen of the rubber shredder, particles that meet the size requirements are discharged from the bottom screen of the shredder, and particles that do not meet the size requirements are sent back to the angle between the shaft and the fixed blade for further crushing processing. 

During the entire crushing process, we usually use a 50 * 50 circular mesh screen as the coarse selection structure, and when the required size (50 × After the rubber blocks are discharged, they can be processed into 6-12mm rubber particles in a rubber crusher. If further crushing is desired, rubber grinding equipment can be used to further grind the rubber particles.